Demand Peripherals: New Product Ideas

Home » Development » New Product Ideas » Waveform generator (AD9833 based waveform generator)

Show: Today's Messages :: Polls :: Message Navigator
E-mail to friend

Waveform generator [message #6]

Sun, 12 April 2020 01:25

BobSmith
Messages: 10
Registered: April 2020

Junior Member

Build a computer controlled waveform generator.
The AD9833 is a good choice for this design. An ESPI peripheral should work and might not need any modification. The host driver should be fairly simple. The simplicity of the circuit and the relatively low frequencies involved should make PCB layout not too difficult.

A similar design is available from MikroElektronika:
https://www.digikey.com/product-detail/en/mikroelektronika/M IKROE-3309/1471-2144-ND/9953078

Report message to a moderator

Previous Topic:	Weather sensor card
Next Topic:	Analog CPLD

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Jan 31 08:48:30 UTC 2026

Total time taken to generate the page: 0.02188 seconds